 |
PowerStoR SSR2120 Full Featured SAN Storage Server Starting at P 406,250.00 |
 |
| Features | Gallery | Tech Specs | Service & Support |
|
| SPECIFICATION | |
| Raw Storage Capacity | - Expandable to 3.0 TB - using twelve 250 GB drives - Expandable to 4.8 TB - using twelve 400 GB drives - Expandable to 6.0 TB - using twelve 500 GB drives |
| Drive Bays | - 12 Serial ATA (SATA) Hot Pluggable |
| Hard Disk Drive Supported | - 3.5-inch SATA |
| Processor | - A single Intel® Xeon® processor 2.80 GHz with 1 MB L2 cache |
| Memory Capacity | - Expandable to 16GB maximum |
| Memory Type | - Synchronous Dynamic Random Access Memory (SDRAM), DDR2-400, Registered, ECC |
| DIMM Slots | - Six 184-pin DIMM sockets |
| Enclosure Management Controller | - On-board Vitesse* VSC055 micro-controller |
| Temperature Sensor | - Two temperature sensors are located on the backplane that allows drive cage temperature monitoring by enclosure management |
| SAF-TE Support | - The backplane firmware complies with version 1.00 rev 041497, of the SAF-TE specification |
| SATA Compliance | - SATA 1.5 Gb/s, 3.0 Gb/s |
| Client Connectivity | - Client connectivity via Internet Protocol Small Computer System Interface (iSCSI) Dual Gb/s Ethernet |
| Serial Port | - Management console port |
| LEDs | - Fault, ID, Power |
| Buttons and Switches | - Power button, Reset button |
| I/O Connectors | - 1x RJ-45 COM B Serial port, 2x RJ-45 Ethernet ports |
| Power Receptacle | - 1x IEC AC per installed power supply module |
| Chassis | - Form Factor: 2U rack-mount chassis - Height: 86.7 mm, 3.41 - Width: 447 mm, 17.6 - Depth: 631 mm, 24.8 - Color: Black plastics, Silver sheet metal - Rack Support: As shipped (zero drives): approximately 16 kg, 35.2 pounds Fully configured (twelve drives): approximately 27.5 kg, 61 pounds Shipping container: 3.2 kg, 7 pounds |
| System Cooling | - Fans: Chassis includes three dual rotors and two single rotor 40 mm hot-swappable redundant system fans for cooling the hard drives, baseboard and SATA Host Bus Adapter (HBA) cards - The Power supply enclosure contains one 60 mm fan |
| Power | - Configuration: 500 W continuous, 1+1 redundant power supplies PowerStoR® Storage System SSR2120 ships with one 500 W power supply - Max AC input current (PS Module): 7.2 Amperes at 110 Vrms, 3.5 A at 220 Vrms (each power supply module) - Max +3.3 V output (PS Enclosure): 20.0 A (total combined power for the +3.3 V and +5 V outputs should not exceed 120 W) - Max +5 V output (PS Enclosure): 20.0 A (total combined power for the +3.3 V and +5 V outputs should not exceed 120 W) - Max +12 V output1 current (PS Module): 18.0 A (total combined power for the +12 V outputs should not exceed 360 W) - Max +12 V output2 current (PS Module): 18.0 A (total combined power for the +12 V outputs should not exceed 360 W) - Max +12 V output3 current (PS Module): 18.0 A (total combined power for the +12 V outputs should not exceed 360 W) - Max -12 V output current (PS Module): 0.5 A (each power supply module) |
| Environment | - Ambient Temperature: Operating (system): 10° C to +35° C, with maximum change not to exceed 10° C; non-operating (system): -40° C to +70° C - Relative Humidity: Non-operating: 90% @ 35° C non-condensing - Acoustics: <59 decibel average (dBA) (rack mount) in an idle state in a normal office environment (23° C) - Electrostatic Discharge: 15 KV per Intel test specification |
| Safety Compliance | - International: IEC60950 (CB Report and Certificate) - Canada: UL60950 – CSA 60950 (UL and cUL) - United States: UL – 60950 – CSA 60950 (UL and cUL) - China: GB4943 – CNCA Certification |
| SERVICE & SUPPORT |
| System Warranty |
| 3 Years Parts and Labor Warranty |
| ON-SITE Service |
| 3 Years Same Business Day ON-SITE Service |
| Planning and Design |
| In this phase, we gather your specific requirements to develop a needs assessment, complete a statement of work, and provide a price quote. |
| Deployment |
| Once this initial groundwork is laid, we help you with project management, as we provide resources, schedules, and documentation for your solution. This phase includes the configuration of hardware and backups, and comprehensive customer orientation. We configure your PowerStoR to your specific needs, as well as complete any special projects you might request. |
)
)
)
)
)
)
