 |
| Description : |
Wireless LAN uses radio frequencies to transmit and
receive data between PC's or other network devices without wires or
cables. The applications of wireless LAN include independent networks
(suitable for small or temporary peer-to-peer configurations) and
infrastructure networks, offering fully distributed data connectivity
via micro cells and roaming.
The TWL-A11 Wireless LAN Access Point is designed and manufactured
by Xitrix Computer System --- a company with expertise in wireless
communication sector. Its performance and reliability exceed the requirements
of IEEE 802.11b standard. It can be used as a bridge to enable wireless
network access in Ethernet environment. |
| Features : |
* Compliant with IEEE 802.11b standard
* Automatic data rate fallback under noisy environment (11 / 5.5 /
2 / 1 Mbps)
* Supports a wide range of operating systems
* Interoperable with IEEE 802.11b compliant equipment
* Supports full mobility and seamless roaming from cell to cell
* Local, remote and automatic configuration
* Easy client management with utility software
* Desk top and wall/ceiling mount
* Up to 300m operating range (environment dependent)
* Bridging function |
| Specifications : |
General
* Standards Compliance: IEEE 802.3 and 802.11b
* Security: WEP 64, 128 bit, encryption RC4
|
Hardware
* RF Range: 2.4 ~ 2.4835 GHz
* Data Rate: 11 / 5.5 / 2 / 1 Mbps
* Modulation: DSSS (Direct Sequence Spread Spectrum) DBPSK/DQPSK
* Coding: 1, 2 Mbps: 11 chip/bit Barker Cording
5.5, 11 Mbps: Complementary Code Keying
* Number of Channels: Europe: 13 (3 non-overlapping)
US: 11 (3 non-overlapping)
France: 4 (1 non-overlapping)
Japan: 14 (3 non-overlapping)
* Host Interface: RJ-45
USB (local configuration)
* Transmit Power (Typ.): +15 dBm
* Receive Sensitivity (Typ.): -83 dBm for 11Mbps; -88 dBm for 5.5 / 2 / 1 Mbps
(@BER 10E-5)
* Current Drain: <500mA @ 5VDC
|
|
Software
* OS Supported: Windows 95/98/ME/NT/2000/XP
* Management Interface: Local: USB Remote: SNMP DHCP
client
|
Mechanical
* Antenna: Two SX connectors for external antennas
* LED Indicators: Power, CCA, activity, and duplex
* Dimensions: 167.0 x 117.5 x 35.5 mm (w/o antenna)
* Weight: Less than 350 g (excluding power adapter) |
Environmental
* Temperature: 0 ~ +55¢XC (operating)
-10 ~ +85¢XC (storage)
* Relative Humidity: 95% (non-condensing)
* Power Adapter: 90~264 VAC input, 5VDC output
|
EMC Certificate
* U.S., Canada: FCC Part 15, sections 15.247, 15.205, 15.209; RSS-210
* Europe: ETS 300 328, ETS 300 826, CE Marked |
| |
Note:
1. Specifications are subject to change without notice. |
